Seamaid Ecoproof pool lamp multicolor RGB PAR56 270Led 16W with remote control

149,00

New Seamaid Ecoproof LED RGB lamp with remote control, watertight technology suitable for new construction, renewal or replacement.

SKU: 502266 Category:

Description

SEAMAID MULTICOLOR RGB LAMP WITH REMOTE CONTROL

Equipped with a rear linkage chamber, PAR56 SeaMAID Ecoproof lamp is 100% waterproof.Of universal size, it fits perfectly in place of a 300W incandescent or LED lamp.
This world-wide innovation offers advantages for construction, renewal and replacement.This lamp allows to illuminate a pool up to 10 x 5 meters in a perfectly harmonious and unobtrusive manner.

To fasten this new lamp to the crown of the projector, simply screw on the supplied brackets. This allows for labor and material savings, thanks also to:

  • Elimination of the back
  • Eliminating the joint
  • Removal of the cable gland
  • Reduction of the number of screws in stainless steel

On existing pools, it is possible to install the lamp without necessarily replacing the niche by purchasing the lighthouse niche adapter kit (consisting of an ABS crown, three adjustable metal tabs and screws) making the universal solution

FOR ALL EXISTING POOLS: the SEAMAID LED PAR56 LED lamps are standard and can replace all existing PAR56 lamps, regardless of the brand of the lighthouse.

FOR SWIMMING POOLS TO BE CARRIED OUT cable with a cross section 2 × 1.5 mm enough to realize the electrical installation of the transformer and the lamp with a financial gain important in the face of the price of the lamp.
This lamp allows you to use the transformers smaller therefore less expensive and consume less.
Very easy to install and use is practically indestructible (ABS and polycarbonate). The outer lens ultrasonically welded ensures a perfect seal.

The seamaid lamps are compatible on existing niches PAR56.
ABS shell with screw terminal molded into the body.
Polycarbonate lens ultrasonically welded.

The firing order is done from the main control panel of the pool.

ENERGY CLASS: A
IP68 (1m)
CLASS III
16 W

SPECIFICATIONS:

  • Color temperature: multicolor RVB
  • Number of LEDs: 270
  • Programs: 11 fixed colors and 5 automatic programs
  • Control: On / Off + Remote control
  • Luminous efficiency: 510lm / full rGb
  • V. / Hz.: 12v / 50-60Hz
  • Power: 16 W
  • Illumination beam: 120°

OPERATION
The system offers 16 programs including 11 static colours and 5 automatic modes. The control is made manually by the remote controller provided and also short cuts of the current.
Each fast cut of the current (less than 2 seconds) makes change the programs. After leaving the lamps OFF for over 10 seconds, switch ON restarts from the last program used.
The use of the remote controller requires a positioning facia to the lamp at a maximum distance of 10 meters, unfolded antenna. Metallic part closed to the lamp can cut the radio reception and the distance of use under 1 to 2 meters.
At first use,the remote controller needs to be paired with the receiver installed in the projector.

Pairing process

  • Install the battery in the remote controller and switch on the projector
  • Switch it OFF for a minimum of 20 seconds and turn ON the current again
  • Make fast OFF/ON/OFF/ON from the power supply of the lamp(s)
  • Press the buttons O & S together during 1 second
  • Each lamp connected flash several times to valid the pairing and keep a static colour

Press several times the button C or P until obtaining the colour or the desired program.

Resistant: A polycarbonate injection gives the lamp a very high resistance to shocks, heat and chemical reactions with water treatment products. Two built-in screw-in terminals guarantee the strength of the 12V power cable connection.

Reliable and efficient: Friction welded lens, designed for underwater lighting applications, offers optimised and even light diffusion in the swimming pool while being gentle to swimmers’ eyes.
Economical: The LED based light source allows major savings, both for users (energy efficiency) and professionals, when constructing a pool. A 2×1.5mm² cable connected to a 20W protected toroidal transformer is sufficient for installing a SeaMAID PAR56 lamp (saving on materials, labour).

INSTALLATION RECOMMENDATIONS:

These pool lamps must be connected to a two-coil insulated safety transformer that is at least 20% more powerful then the total absorber power.

Additional information

Weight 2 kg
Dimensions 20 × 20 × 20 cm